<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor IP [Engine build 7062] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>FOREVER</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <SupportOrientation>-1</SupportOrientation>
  <Supplier>FOREVER</Supplier>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.4449958801269531</x>
        <y>0.012159347534179688</y>
        <z>10.250009536743164</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <DisplayInformation>Multi UNIT</DisplayInformation>
      <Keyword>MultiUNIT</Keyword>
      <AxisScrewChannel>
        <x>0</x>
        <y>0</y>
        <z>1</z>
      </AxisScrewChannel>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.095766127109527588</x>
            <y>-1.7146358489990234</y>
            <z>9.3512144088745117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>multi scan body.STL</MarkerFilename>
          <SupportFilename>multi hex connection geo.STL</SupportFilename>
          <ImplantFilename>multi hex analog.STL</ImplantFilename>
          <DisplayInformation>HEX SMART BASE</DisplayInformation>
          <Keyword>HEXSMARTBASE</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12711179256439209</x>
            <y>-1.6718053817749023</y>
            <z>9.4939823150634766</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>multi scan body.STL</MarkerFilename>
          <SupportFilename>multi smart no hex kabul.STL</SupportFilename>
          <ImplantFilename>multi analog no hex.STL</ImplantFilename>
          <DisplayInformation>NON HEX SMART BASE</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>NONHEXSMARTBASE</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <MarkerFilename>multi scan body.STL</MarkerFilename>
          <SupportFilename>multi non hex.STL</SupportFilename>
          <ImplantFilename>multi analog no hex.STL</ImplantFilename>
          <DisplayInformation>BAR BRIDGE</DisplayInformation>
          <Keyword>BARBRIDGE</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>SMART BASE HEX</DisplayInformation>
      <Keyword>SMARTBASEHEX</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.24502784013748169</x>
            <y>-1.6849269866943359</y>
            <z>11.57524299621582</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4001 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4001 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 1MM</DisplayInformation>
          <Keyword>4H4GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15498960018157959</x>
            <y>-1.6931085586547852</y>
            <z>11.547971725463867</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4002 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4002 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 2MM</DisplayInformation>
          <Keyword>4H4GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.00454556941986084</x>
            <y>-1.7182025909423828</y>
            <z>11.464325904846191</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4003 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4003 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 3MM</DisplayInformation>
          <Keyword>4H4GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.033035159111022949</x>
            <y>-1.7613086700439453</y>
            <z>11.320640563964844</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4004 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4004 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 4MM</DisplayInformation>
          <Keyword>4H4GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12364399433135986</x>
            <y>-1.7359399795532227</y>
            <z>11.40520191192627</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4005 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4005 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 5MM</DisplayInformation>
          <Keyword>4H4GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15270429849624634</x>
            <y>-1.7618570327758789</y>
            <z>11.318807601928711</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4501 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4501 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 1MM</DisplayInformation>
          <Keyword>45H4GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.24274235963821411</x>
            <y>-1.7536773681640625</y>
            <z>11.346077919006348</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4502 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4502 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 2MM</DisplayInformation>
          <Keyword>45H4GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.062952399253845215</x>
            <y>-1.7614450454711914</y>
            <z>11.320182800292969</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4503 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4503 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 3MM</DisplayInformation>
          <Keyword>45H4GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.055860280990600586</x>
            <y>-1.7351150512695313</y>
            <z>11.407951354980469</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4504 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4504 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 4MM</DisplayInformation>
          <Keyword>45H4GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12450098991394043</x>
            <y>-1.7101593017578125</y>
            <z>11.491138458251953</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4505 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4505 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 5MM</DisplayInformation>
          <Keyword>45H4GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.063238084316253662</x>
            <y>-1.7528524398803711</y>
            <z>11.348827362060547</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5001 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5001 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 1MM</DisplayInformation>
          <Keyword>5H4GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.18462133407592773</x>
            <y>-1.7018394470214844</y>
            <z>11.518867492675781</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5002 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5002 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 2MM</DisplayInformation>
          <Keyword>5H4GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034177899360656738</x>
            <y>-1.726933479309082</y>
            <z>11.435223579406738</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5003 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5003 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 3MM</DisplayInformation>
          <Keyword>5H4GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.3022913932800293</x>
            <y>-1.7625446319580078</y>
            <z>11.316516876220703</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5004 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5004 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 4MM</DisplayInformation>
          <Keyword>5H4GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.064095199108123779</x>
            <y>-1.7270698547363281</y>
            <z>11.434764862060547</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5005 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5005 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 5MM</DisplayInformation>
          <Keyword>5H4GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.2729453444480896</x>
            <y>-1.7452211380004883</y>
            <z>11.374265670776367</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4061 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 1MM</DisplayInformation>
          <Keyword>4H6GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12307268381118774</x>
            <y>-1.7531270980834961</y>
            <z>11.34791088104248</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4062 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4062 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 2MM</DisplayInformation>
          <Keyword>4H6GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.00511699914932251</x>
            <y>-1.701014518737793</y>
            <z>11.521617889404297</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4063 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4063 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 3MM</DisplayInformation>
          <Keyword>4H6GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15241855382919312</x>
            <y>-1.770451545715332</y>
            <z>11.290162086486816</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4064 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4064 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 4MM</DisplayInformation>
          <Keyword>4H6GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12278711795806885</x>
            <y>-1.7617197036743164</y>
            <z>11.319265365600586</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4065 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4065 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 5MM</DisplayInformation>
          <Keyword>4H6GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.11712324619293213</x>
            <y>-1.7778081893920898</y>
            <z>11.265640258789063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4561 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4561 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 1MM</DisplayInformation>
          <Keyword>45H6GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.21339654922485352</x>
            <y>-1.7363510131835938</y>
            <z>11.403827667236328</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4562 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4562 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 2MM</DisplayInformation>
          <Keyword>45H6GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12364399433135986</x>
            <y>-1.7359399795532227</y>
            <z>11.40520191192627</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4563 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4563 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 3MM</DisplayInformation>
          <Keyword>45H6GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.092298328876495361</x>
            <y>-1.7787704467773438</y>
            <z>11.262432098388672</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4564 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4564 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 4MM</DisplayInformation>
          <Keyword>45H6GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.21311080455780029</x>
            <y>-1.7449455261230469</y>
            <z>11.375181198120117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4565 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT4565 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 5MM</DisplayInformation>
          <Keyword>45H6GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.18262159824371338</x>
            <y>-1.7619953155517578</y>
            <z>11.31834888458252</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5061 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5061 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 1MM</DisplayInformation>
          <Keyword>5H6GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.21339654922485352</x>
            <y>-1.7363510131835938</y>
            <z>11.403827667236328</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5062 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5062 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 2MM</DisplayInformation>
          <Keyword>5H6GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.18347853422164917</x>
            <y>-1.7362146377563477</y>
            <z>11.404285430908203</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5063 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5063 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 3MM</DisplayInformation>
          <Keyword>5H6GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12364399433135986</x>
            <y>-1.7359399795532227</y>
            <z>11.40520191192627</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5064 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5064 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 4MM</DisplayInformation>
          <Keyword>5H6GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.093441009521484375</x>
            <y>-1.7443962097167969</y>
            <z>11.37701416015625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5065 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FNT5065 SMART BASE ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 5MM</DisplayInformation>
          <Keyword>5H6GH5MM</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>SMART BASE NON HEX</DisplayInformation>
      <Keyword>SMARTBASENONHEX</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.062952399253845215</x>
            <y>-1.7614450454711914</y>
            <z>11.320182800292969</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4001 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4001 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 1MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H4GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034177899360656738</x>
            <y>-1.726933479309082</y>
            <z>11.435223579406738</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4002 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4002 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 2MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H4GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0039743185043334961</x>
            <y>-1.7353897094726563</y>
            <z>11.407034873962402</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4003 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4003 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 3MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H4GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034749209880828857</x>
            <y>-1.7097463607788086</y>
            <z>11.492513656616211</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4004 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4004 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 4MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H4GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.025085926055908203</x>
            <y>-1.7094707489013672</y>
            <z>11.493430137634277</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4005 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4005 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H4-GH 5MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H4GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.064095199108123779</x>
            <y>-1.7270698547363281</y>
            <z>11.434764862060547</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4501 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4501 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 1MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H4GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15384703874588013</x>
            <y>-1.7274837493896484</y>
            <z>11.433389663696289</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4502 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4502 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 2MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H4GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.092869758605957031</x>
            <y>-1.7615833282470703</y>
            <z>11.319723129272461</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4503 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4503 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 3MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H4GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.18404990434646606</x>
            <y>-1.7190275192260742</y>
            <z>11.461576461791992</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4504 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4504 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 4MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H4GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15384703874588013</x>
            <y>-1.7274837493896484</y>
            <z>11.433389663696289</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4505 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4505 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H4-GH 5MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H4GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.064380884170532227</x>
            <y>-1.7184772491455078</y>
            <z>11.463409423828125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5001 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5001 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 1MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H4GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15298992395401</x>
            <y>-1.7532644271850586</y>
            <z>11.347452163696289</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5002 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5002 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 2MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H4GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.30257695913314819</x>
            <y>-1.7539520263671875</y>
            <z>11.345161437988281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5003 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5003 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 3MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H4GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12335824966430664</x>
            <y>-1.7445335388183594</y>
            <z>11.376556396484375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5004 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5004 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 4MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H4GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034177899360656738</x>
            <y>-1.726933479309082</y>
            <z>11.435223579406738</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5005 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5005 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H4-GH 5MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H4GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.24302816390991211</x>
            <y>-1.7450828552246094</y>
            <z>11.374722480773926</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4061 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4061 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 1MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H6GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.09401237964630127</x>
            <y>-1.727208137512207</y>
            <z>11.434306144714355</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4062 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4062 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 2MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H6GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.064380884170532227</x>
            <y>-1.7184772491455078</y>
            <z>11.463409423828125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4063 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4063 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 3MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H6GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.094869494438171387</x>
            <y>-1.7014274597167969</y>
            <z>11.520241737365723</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4064 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4064 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 4MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H6GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.026228666305541992</x>
            <y>-1.7438459396362305</y>
            <z>11.378847122192383</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4065 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4065 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4-H6-GH 5MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>4H6GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.095155000686645508</x>
            <y>-1.6928339004516602</y>
            <z>11.548887252807617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4561 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4561 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 1MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H6GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15384703874588013</x>
            <y>-1.7274837493896484</y>
            <z>11.433389663696289</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4562 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4562 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 2MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H6GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.035034835338592529</x>
            <y>-1.7011528015136719</y>
            <z>11.521158218383789</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4563 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4563 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 3MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H6GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.00454556941986084</x>
            <y>-1.7182025909423828</y>
            <z>11.464325904846191</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4564 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4564 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 4MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H6GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.024228870868682861</x>
            <y>-1.683690071105957</y>
            <z>11.579366683959961</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT4565 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT4565 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø4,5-H6-GH 5MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>45H6GH5MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.025085926055908203</x>
            <y>-1.7094707489013672</y>
            <z>11.493430137634277</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5061 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5061 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 1MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H6GH1MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.15470385551452637</x>
            <y>-1.7017030715942383</y>
            <z>11.519325256347656</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5062 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5062 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 2MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H6GH2MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.064380884170532227</x>
            <y>-1.7184772491455078</y>
            <z>11.463409423828125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5063 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5063 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 3MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H6GH3MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0048312544822692871</x>
            <y>-1.7096090316772461</y>
            <z>11.492971420288086</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5064 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5064 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 4MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H6GH4MM</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0062595009803771973</x>
            <y>-1.6666402816772461</y>
            <z>11.636198997497559</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>FCT5065 SMART BASE NON HEX ABUTMENT kabuk (0.02).STL</SupportFilename>
          <InterfaceFilename>FCT5065 SMART BASE NON HEX ABUTMENT.STL</InterfaceFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>Ø5-H6-GH 5MM</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>5H6GH5MM</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>CUSTOM ABUTMENT</DisplayInformation>
      <Keyword>CUSTOMABUTMENT</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.064666450023651123</x>
            <y>-1.7098836898803711</y>
            <z>11.492053985595703</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>connection  hex.STL</SupportFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>HEX</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <Keyword>HEX</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0042600035667419434</x>
            <y>-1.7267951965332031</y>
            <z>11.435680389404297</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>simante scan body.STL</MarkerFilename>
          <SupportFilename>connection non hex .STL</SupportFilename>
          <ImplantFilename>simante analog.STL</ImplantFilename>
          <DisplayInformation>NON HEX</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>NONHEX</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>